Veröffentlichungen

Veröffentlichungen in Fachzeitschriften und Tagungsbänden

  • F. J. Hmood, C. Oelgardt, R. Görke , J. G. Heinrich: Preparation of Transparent Microspheres in the System K0.5Na0.5NbO3 by Laser Fusing. J. Ceram. Sci. Tech. accepted for publication (2013).
  • E. Kivitz, R. Görke, A.F. Schilling, J. Zhang, J.G. Heinrich: Influence of processing parameters on microstructure and biocompatibility of surface laser sintered Hydroxyapatite-SiO2 composites. J. Biomed. Mat. Res. Part B: Applied Biomaterials, accepted for publication. (2012).
  • D. Yao, Y. Xia, K. Zuo, D. Jiang, J. Günster, Y. Zeng, J. G. Heinrich: Porous Si3N4 Ceramics Prepared via Partial Nitridation and SHS. J. Eur. Ceram. Soc. Accepted for publication. (2012).
  • X. Tian, D. Li, J. G. Heinrich: Rapid Prototyping of porcelain products by layer-wise slurry deposition (LSD) and direct laser sintering. Rapid Prototyping Journal 18 (2012), 362-373.
  • X. Tian, T. Mühler, C. Gomez, J. Günster, J.G. Heinrich: Feasibility Study on Rapid Prototyping of Porcelain Products. J. Ceram. Sci. Tech. 02 (2011), 217-226.
  • C. Oelgardt, J. Günster, J.G. Heinrich: Characterization of the Crystallization Behavior of Laser-Fused Transperent Microspheres with the Eutectic Composition Al2O3-Y2O3-ZrO2 (AYZ). J. Ceram. Sci. Tech. 02 (2011), 103-110.
  • C. Oelgardt, J. Anderson, J.G. Heinrich, G.L. Messing: Sintering, microstructure and mechanical properties of Al2O3-Y2O3-ZrO2 (AYZ) eutectic composition ceramic microcomposites. J. Eur. Ceram. Soc. 30 (2010), 649-656.
  • Z. Sadeghian, J. G. Heinrich: Growth of carbon nanotubes with different morphologies by pyrolising acetylene. Advances in Applied Ceramics 1 (2010), 29-44.
  • X. Tian, A. Dittmar, J. Melcher, J.G. Heinrich: Sinterability studies on K0.5Na0.5NbO3 using laser as energy source. J. Appl. Surf. Sci. 256 (2010), 5918-5923.
  • X. Tian, B. Sun, J. G. Heinrich, D. Li: Stress relief mechanism in layer-wise laser directly sintered porcelain ceramics. Mat. Sci. Eng. A 527 (2010), 1695–1703.
  • B. Palm, J. Reuer, J.G. Heinrich: Process Optimization in Tableware Industries Using Taguchi’s Design of Experiments. Int. J. Appl. Ceram. Technol. 7 (2010), 226-234.
  • E. Kivitz, B. Palm, J.G. Heinrich, J. Blumm, G. Kolb: Reduction of the porcelain firing temperature by preparation of the raw materials. J. Eur. Ceram. Soc. 29 (2009), 2691–2696.
  • X. Tian, J. Günster, J. Melcher, D. Li, J. G. Heinrich: Process parameters analysis of direct laser sintering and post treatment of porcelain components using Taguchi's method. J. Eur. Ceram. Soc. 29 (2009), 1903–1915.
  • J. Günster, C. Oelgardt , J.G. Heinrich , J. Melcher: The power of light: Self-organized formation of macroscopic amounts of silica melts controlled by laser light. Applied Physics Letters 94 (2009), 021114.
  • M. Esfehanian, J. Günster, J. G. Heinrich, J. Horvath, D. Koch, G. Grathwohl, "High temperature mechanical properties of carbon-silicide-carbide composites developed by melt infiltration technique" J. Eur. Ceram. Soc. 28 (2008) 1267--1274.
  • M. Esfehanian, J. Günster, F. Moztarzadeh, J. G. Heinrich, "Development of a high temperature C_f /(Mo,Ti)Si_2 -SiC composite via reactive melt infiltration." J. Eur. Ceram. Soc., 27 [2-3] (2007)1229.
  • M. Esfehanian, Juergen Horvath, Dietmar Koch, Jens Guenster, Georg Grathwohl, Juergen G. Heinrich: High Temperature Mechanical Behavior of Carbon-Silicide-Carbide Composites Developed by Alloyed Melt Infiltration. J Mater Sci (2007) 42:7721--7728.
  • M. Esfehanian, J. Günster, F. Moztarzadeh, J. G. Heinrich: Development of a high temperature Cf / XSi2-SiC (X=Mo, Ti) composite via reactive melt infiltration. J. Eur. Ceram. Soc. 27 (2007), 1229-1235.
  • J. Günster, J. G. Heinrich, F. Schwertfeger: Laser sintering of ultra pure SiO2 crucibles. Int. J. Appl. Ceram. Tech. 3 (2006), 68-74.
  • Z. Sadeghian, J.G. Heinrich, F. Moztarzadeh: Influence of powder pre-treatments and milling on dispersion ability of aqueous hydroxyapatite-based suspensions. Ceramics International 32 (2006), 331-337.
  • A. K. Bhattacharya, J. G. Heinrich: Cellular Molybdenum Silicide/Silicon Carbide Composites from Stems of Maize. J. Am. Ceram. Soc. 89 (2006), 367-369.
  • A. K. Bhattacharya, J. G. Heinrich: Cellular SiC Ceramic from Stems of Corn-Processing and Microstructure. J. Mat. Sci. 41 (2006), 2443-2448.
  • 1B. Bitterlich, J.G. Heinrich: Processing, Microstructure, and Properties of Laminated Silicon Nitride Stacks. J. Am. Ceram. Soc. 88 (2005) 2713-2721.
  • Z. Sadeghian, J. G. Heinrich, F. Moztarzadeh. Dispersion of Hydroxyapatite Powder in Aqueous Media. Advances in Applied Ceramics (accepted for publication)
  • Z. Sadeghian, J. G. Heinrich, F. Moztarzadeh. Influence of powder pre-treatments and milling on dispersion ability of aqueous hdroxyapatite-based suspensions. Ceramics International (accepted for publication).
  • Z. Sadeghian, J. G. Heinrich, F. Moztarzadeh. Preparation of highly concentrated aqueous hydroxyapaptite suspensions for slip casting. J. Mat. Sci. (accepted for publication).
  • J. Günster, S. Engler, J. G. Heinrich, F. Schwertfeger. A novel route for the production of ultra pure SiO2 crucibles. Glass Sci. Technol. 78 (2005), 18-22.
  • A. Maghsoudipour, M. A. Bahrevar, J. G. Heinrich, F. Moztarzadeh. Reaction sintering of AlN-Al2O3 composites. J. Eur. Ceram. Soc. 25 (2005), 1067-1072.
  • J.-W. Kim, J. G. Heinrich. Influence of processing parameters on microstructure and ferroelectric properties of PZT-coated SiC fibers. J. Eur. Ceram. Soc. 25 (2005), 1067-1072.
  • J. Günster, S. Engler, J. G. Heinrich, F. Schwertfeger. Kontaminationsfreie Sinterung einer SiO2-Keramik mittels CO2-Laser. Photonik 5 (2004), 44-47.
  • Z. Sadeghian, J. G. Heinrich, F. Moztdarzadeh. Direct Laser Sintering of Hydroxyapatite Implants by Layer-wise Slurry Deposition (LSD). cfi/Ber. DKG 82 (2004), E1-E5.
  • A. Maghsoudipour, F. Moztarzadeh, M. Saremi, J. G. Heinrich. Oxidation behavior of AlN-Al2O3 composites. Ceramics International 30 (2004), 773-783.
  • F. Schwertfeger, S. Engler, J. Günster, J.G. Heinrich. Kontaminationsfreie Sinterung einer SiO2-Keramik mittels CO2-Laser. Photonik 5 (2004), 2-5.
  • A. Bhattachria, J. G. Heinrich. Cellular SiC Ceramic from Stems of Corn-Processing and Microstructure. J. Mat. Sci. (accepted for publication).
  • J.-W. Kim, J. G. Heinrich. Influence of processing parameters on microstructure and ferroelectric properties of PZT-coated SiC-fibers. J. Eur. Ceram. Soc. (accepted for publication).
  • E. Salahi, J. G. Heinrich. Investigation of microstructural evolution during nitridation of aluminium using simultaneous thermal analysis. Brit. Ceram. Trans. 103 (2004), 115-120.
  • T. Prescher, J. G. Heinrich. Microstructure-Properties-Correlation of Continuously Sintered Silicon Nitride. cfi/Ber. DKG 81 (2004) E37-E41.
  • E. Salahi, J.G. Heinrich. Correlation between nitriding process and microstructure of reaction bonded aluminium nitride ceramics. Brit. Ceram. Trans. 102 (2003), 161-168.
  • E. Salahi, J. G. Heinrich. Synthesis and thermal behaviour of β-tricalcium phosphate precipitated from aqueous solutions. Brit. Ceram. Trans. 102 (2002), 79-82.
  • J. Günster, S. Engler, J.G. Heinrich. Forming of Complex Shaped Ceramic Products via Layer-wise Slurry Deposition. Bull.Eur.Ceram.Soc. 1 (2003), 25-28.
  • A. Maghsoudipour, F. Moztarzadeh, J. G. Heinrich and M. A. Bahrevar. Sintering Behaviour AlN-Al2O3 Composites. Int. J. Eng. Sci. 13 (2002), 159-167.
  • E. Salahi, F. Moztarzadeh, J. G. Heinrich and V. Margoosian. The Influence of Microstructure on the Oxidation Behavior and Thermal Conductivity of Reaction Bonded Aluminium Nitride (RBAN) Ceramics. Int. J. Eng. Sci.
  • E. Salahi, J.G. Heinrich, F. Moztarzadeh, V. Margoosian. Influence of Aluminum Powder Particle Size and Morphology on Microstructure and Properties of Porous Reaction Bonded Aluminum Nitride. cfi/Ber. DKG 79 (2002), E1-E7.
  • B. Bitterlich, J. G.Heinrich. Aqueous tape casting of silicon nitride. J. Eur. Ceram. Soc. 22 (2002), 2427-2434.
  • J. Günster, R. Görke, J. G. Heinrich, R. Souda. Pulsed laser ablation of dense sintered AlN und AIN powder samples studied by time-of-flight mass spectroscopy. Appl. Surf. Sci.. 173 (2001), 76-83.
  • S. Meier, J. G. Heinrich. Processing - microstructure - properties relationships of MoSi2/SiC- composites. J. Eur. Ceram. Soc. 22 (2002), 2357-2363.
  • J. Günster, J. G. Heinrich, S. Dieckhoff, H. van Eys-Schäfer, S. Otani, R. Souda. Well defined nano-structure nucleation sites provided by the facetted TiC (111) surface. Appl. Phys. Lett. 77 (2000), 3173-3175.
  • R. Görke, T. Krause, J. Günster, C. Ries, J. G. Heinrich. Laser Assisted Sintering of Porcelain. In: J. P. Sing, N. A. Bansal, K. Niihara (eds.): Innovative Processing and Synthesis of Ceramics, Glasses and Composites III, Ceramic Transactions, Vol. 108 (2000), 91-96.
  • J. G. Heinrich. New Developments in the Solid Freeform Fabrication of Ceramic Components. cfi/Ber. DKG 76 (1999), 29-35.
  • J. G. Heinrich, C. Ries, R. Görke, T. Krause. Lasersintern keramischer Werkstoffe. In: J. Heinrich, G. Ziegler, W. Hermel, H. Riedel (Hrsg.): Werkstoffwoche 98, Band VII, Symposium 9 Keramik, Wiley-VCH, Weinheim, New York, Chichester, Brisbane, Singapore, Toronto, 1999.

Bücher und Tagungsbände

  • J. G. Heinrich: Keramische Formgebungsverfahren. In: H. Salmang, H. Scholze, R. Telle, Keramik, Springer-Verlag, Berlin/Heidelberg, 2006.
  • J. G. Heinrich, H. Gasthuber (Eds.): Keramik im Fahrzeugbau. Deutsche Keramische Gesellschaft e.V., Köln, 2003.
  • J. G. Heinrich, F. Aldinger (Eds.): Ceramic Materials and Components for Engines. Wiley-VCH, Weinheim, New York, Chichester, Brisbane, Singapore, Toronto, 2001.
  • J. G. Heinrich, G. Ziegler, W. Hermel, H. Riedel (Eds.): Werkstoffwoche 98, Band VII, Symposium 9 Keramik, Wiley-VCH, Weinheim, New York, Chichester, Brisbane, Singapore, Toronto, 1999.

CD-ROM

  • J. G. Heinrich: Physikalische und chemische Grundlagen der Keramik, Teil II: Eigenschaften keramischer Werkstoffe. 2. Auflage, 2005.
  • J. G. Heinrich: Introduction to the Principles of Ceramic Forming. Göller Verlag, Baden- Baden, 2004, ISBN 3-87264-016-X.
  • J. G. Heinrich, A. Bertram: Physikalische und chemische Grundlagen der Keramik, Teil I: Struktureller Aufbau keramischer Werkstoffe. 2003.
  • J. G. Heinrich, A. Bertram: Heterogene Gleichgewichte. 2002.
 

Kontakt  Suche  Sitemap  Datenschutz  Impressum
© TU Clausthal 2018